Pipelines for the GitLab project

Pipelines for gitlab-org/gitlab (as well as the dev instance's) is configured in the usual .gitlab-ci.yml which itself includes files under .gitlab/ci/ for easier maintenance.

We're striving to dogfood GitLab CI/CD features and best-practices as much as possible.

Predictive test jobs before a merge request is approved

To reduce the pipeline cost and shorten the job duration, before a merge request is approved, the pipeline will run a predictive set of RSpec & Jest tests that are likely to fail for the merge request changes.

After a merge request has been approved, the pipeline would contain the full RSpec & Jest tests. This will ensure that all tests have been run before a merge request is merged.

Overview of the GitLab project test dependency

To understand how the predictive test jobs are executed, we need to understand the dependency between GitLab code (frontend and backend) and the respective tests (Jest and RSpec). This dependency can be visualized in the following diagram:

flowchart LR
    subgraph frontend
    fe["Frontend code"]--tested with-->jest
    end
    subgraph backend
    be["Backend code"]--tested with-->rspec
    end

    be--generates-->fixtures["frontend fixtures"]
    fixtures--used in-->jest

In summary:

RSpec tests are dependent on the backend code.
Jest tests are dependent on both frontend and backend code, the latter through the frontend fixtures.

Predictive Tests Dashboards

The `detect-tests` CI job

Most CI/CD pipelines for gitlab-org/gitlab will run a detect-tests CI job in the prepare stage to detect which backend/frontend tests should be run based on the files that changed in the given MR.

The detect-tests job will create many files that will contain the backend/frontend tests that should be run. Those files will be read in subsequent jobs in the pipeline, and only those tests will be executed.

RSpec predictive jobs

Determining predictive RSpec test files in a merge request

To identify the RSpec tests that are likely to fail in a merge request, we use static mappings and dynamic mappings.

Static mappings

We use the test_file_finder gem, with a static mapping maintained in the tests.yml file for special cases that cannot be mapped via coverage tracing (see where it's used).

The test mappings contain a map of each source files to a list of test files which is dependent of the source file.

Dynamic mappings

First, we use the test_file_finder gem, with a dynamic mapping strategy from test coverage tracing (generated via the Crystalball gem) (see where it's used).

In addition to test_file_finder, we have added several advanced mappings to detect even more tests to run:

FindChanges (!74003)
- Automatically detect Jest tests to run upon backend changes (via frontend fixtures)
PartialToViewsMappings (#395016)
- Run view specs when Rails partials included in those views are changed in an MR
JsToSystemSpecsMappings (#386754)
- Run certain system specs if a JavaScript file was changed in an MR
GraphqlBaseTypeMappings (#386756)
- If a GraphQL type class changed, we should try to identify the other GraphQL types that potentially include this type, and run their specs.
ViewToSystemSpecsMappings (#395017)
- When a view gets changed, we try to find feature specs that would test that area of the code.
ViewToJsMappings (#386719)
- If a JS file is changed, we should try to identify the system specs that are covering this JS component.
FindFilesUsingFeatureFlags (#407366)
- If a feature flag was changed, we check which Ruby file is including that feature flag, and we add it to the list of changed files in the detect-tests CI job. The remainder of the job will then detect which frontend/backend tests should be run based on those changed files.

Exceptional cases

In addition, there are a few circumstances where we would always run the full RSpec tests:

when the pipeline:run-all-rspec label is set on the merge request. This label will trigger all RSpec tests including those run in the as-if-foss jobs.
when the pipeline:mr-approved label is set on the merge request, and if the code changes satisfy the backend-patterns rule. Note that this label is assigned by triage automation when the merge request is approved by any reviewer. It is not recommended to apply this label manually.
when the merge request is created by an automation (for example, Gitaly update or MR targeting a stable branch)
when the merge request is created in a security mirror
when any CI configuration file is changed (for example, .gitlab-ci.yml or .gitlab/ci/**/*)

Have you encountered a problem with backend predictive tests?

If so, please have a look at the Engineering Productivity RUNBOOK on predictive tests for instructions on how to act upon predictive tests issues. Additionally, if you identified any test selection gaps, please let @gl-quality/eng-prod know so that we can take the necessary steps to optimize test selections.

Jest predictive jobs

Determining predictive Jest test files in a merge request

To identify the jest tests that are likely to fail in a merge request, we pass a list of all the changed files into jest using the --findRelatedTests option. In this mode, jest would resolve all the dependencies of related to the changed files, which include test files that have these files in the dependency chain.

Exceptional cases

In addition, there are a few circumstances where we would always run the full Jest tests:

when the pipeline:run-all-jest label is set on the merge request
when the merge request is created by an automation (for example, Gitaly update or MR targeting a stable branch)
when the merge request is created in a security mirror
when relevant CI configuration file is changed (.gitlab/ci/rules.gitlab-ci.yml, .gitlab/ci/frontend.gitlab-ci.yml)
when any frontend dependency file is changed (for example, package.json, yarn.lock, config/webpack.config.js, config/helpers/**/*.js)
when any vendored JavaScript file is changed (for example, vendor/assets/javascripts/**/*)

The rules definitions for full Jest tests are defined at .frontend:rules:jest in rules.gitlab-ci.yml.

Have you encountered a problem with frontend predictive tests?

If so, please have a look at the Engineering Productivity RUNBOOK on predictive tests for instructions on how to act upon predictive tests issues.

Fork pipelines

We run only the predictive RSpec & Jest jobs for fork pipelines, unless the pipeline:run-all-rspec label is set on the MR. The goal is to reduce the compute quota consumed by fork pipelines.

See the experiment issue.

Fail-fast job in merge request pipelines

To provide faster feedback when a merge request breaks existing tests, we implemented a fail-fast mechanism.

An rspec fail-fast job is added in parallel to all other rspec jobs in a merge request pipeline. This job runs the tests that are directly related to the changes in the merge request.

If any of these tests fail, the rspec fail-fast job fails, triggering a fail-pipeline-early job to run. The fail-pipeline-early job:

Cancels the currently running pipeline and all in-progress jobs.
Sets pipeline to have status failed.

For example:

graph LR
    subgraph "prepare stage";
        A["detect-tests"]
    end

    subgraph "test stage";
        B["jest"];
        C["rspec migration"];
        D["rspec unit"];
        E["rspec integration"];
        F["rspec system"];
        G["rspec fail-fast"];
    end

    subgraph "post-test stage";
        Z["fail-pipeline-early"];
    end

    A --"artifact: list of test files"--> G
    G --"on failure"--> Z

The rspec fail-fast is a no-op if there are more than 10 test files related to the merge request. This prevents rspec fail-fast duration from exceeding the average rspec job duration and defeating its purpose.

This number can be overridden by setting a CI/CD variable named RSPEC_FAIL_FAST_TEST_FILE_COUNT_THRESHOLD.

Re-run previously failed tests in merge request pipelines

In order to reduce the feedback time after resolving failed tests for a merge request, the rspec rspec-pg14-rerun-previous-failed-tests and rspec rspec-ee-pg14-rerun-previous-failed-tests jobs run the failed tests from the previous MR pipeline.

This was introduced on August 25th 2021, with https://gitlab.com/gitlab-org/gitlab/-/merge_requests/69053.

How it works?

The detect-previous-failed-tests job (prepare stage) detects the test files associated with failed RSpec jobs from the previous MR pipeline.
The rspec rspec-pg14-rerun-previous-failed-tests and rspec rspec-ee-pg14-rerun-previous-failed-tests jobs will run the test files gathered by the detect-previous-failed-tests job.

graph LR
    subgraph "prepare stage";
        A["detect-previous-failed-tests"]
    end

    subgraph "test stage";
        B["rspec rspec-pg14-rerun-previous-failed-tests"];
        C["rspec rspec-ee-pg14-rerun-previous-failed-tests"];
    end

    A --"artifact: list of test files"--> B & C

Merge Trains

Why do we need to have a "stable" master branch to enable merge trains?

If the master branch is unstable (i.e. CI/CD pipelines for the master branch are failing frequently), all of the merge requests pipelines that were added AFTER a faulty merge request pipeline would have to be cancelled and added back to the train, which would create a lot of delays if the merge train is long.

How stable does the master branch have to be for us to enable merge trains?

We don't have a specific number, but we need to have better numbers for flaky tests failures and infrastructure failures (see the Master Broken Incidents RCA Dashboard).

Could we gradually move to merge trains in our CI/CD configuration?

There was a proposal from a contributor, but the approach is not without some downsides: see the original proposal and discussion.

Faster feedback for some merge requests

Broken Master Fixes

When you need to fix a broken master, you can add the pipeline:expedite label to expedite the pipelines that run on the merge request.

Note that the merge request also needs to have the master:broken or master:foss-broken label set.

Revert MRs

To make your Revert MRs faster, use the revert MR template before you create your merge request. It will apply the pipeline:expedite label and others that will expedite the pipelines that run on the merge request.

The `pipeline:expedite` label

When this label is assigned, the following steps of the CI/CD pipeline are skipped:

The e2e:package-and-test job.
The rspec:undercoverage job.
The entire Review Apps process.

Apply the label to the merge request, and run a new pipeline for the MR.

Test jobs

We have dedicated jobs for each testing level and each job runs depending on the changes made in your merge request. If you want to force all the RSpec jobs to run regardless of your changes, you can add the pipeline:run-all-rspec label to the merge request.

WARNING: Forcing all jobs on docs only related MRs would not have the prerequisite jobs and would lead to errors

End-to-end jobs

The e2e:package-and-test child pipeline runs end-to-end jobs automatically depending on changes, and is manual in other cases. See .qa:rules:package-and-test in rules.gitlab-ci.yml for the specific list of rules.

If you want to force e2e:package-and-test to run regardless of your changes, you can add the pipeline:run-all-e2e label to the merge request.

Consult the End-to-end Testing dedicated page for more information.

Review app jobs

The start-review-app-pipeline child pipeline deploys a Review App and runs end-to-end tests against it automatically depending on changes, and is manual in other cases. See .review:rules:start-review-app-pipeline in rules.gitlab-ci.yml for the specific list of rules.

If you want to force a Review App to be deployed regardless of your changes, you can add the pipeline:run-review-app label to the merge request.

Consult the Review Apps dedicated page for more information.

As-if-FOSS jobs

The * as-if-foss jobs run the GitLab test suite "as if FOSS", meaning as if the jobs would run in the context of gitlab-org/gitlab-foss. These jobs are only created in the following cases:

when the pipeline:run-as-if-foss label is set on the merge request
when the merge request is created in the gitlab-org/security/gitlab project
when any CI configuration file is changed (for example, .gitlab-ci.yml or .gitlab/ci/**/*)

The * as-if-foss jobs are run in addition to the regular EE-context jobs. They have the FOSS_ONLY='1' variable set and get the ee/ folder removed before the tests start running.

The intent is to ensure that a change doesn't introduce a failure after gitlab-org/gitlab is synced to gitlab-org/gitlab-foss.

As-if-JH cross project downstream pipeline

What it is

This pipeline is also called JiHu validation pipeline, and it's currently allowed to fail. When that happens, please follow What to do when the validation pipeline fails.

How we run it

The start-as-if-jh job triggers a cross project downstream pipeline which runs the GitLab test suite "as if JiHu", meaning as if the pipeline would run in the context of GitLab JH. These jobs are only created in the following cases:

when changes are made to feature flags
when the pipeline:run-as-if-jh label is set on the merge request

This pipeline runs under the context of a generated branch in the GitLab JH validation project, which is a mirror of the GitLab JH mirror.

The generated branch name is prefixed with as-if-jh/ along with the branch name in the merge request. This generated branch is based on the merge request branch, additionally adding changes downloaded from the corresponding JH branch on top to turn the whole pipeline as if JiHu.

The intent is to ensure that a change doesn't introduce a failure after GitLab is synchronized to GitLab JH.

When to consider applying `pipeline:run-as-if-jh` label

If a Ruby file is renamed and there's a corresponding prepend_mod line, it's likely that GitLab JH is relying on it and requires a corresponding change to rename the module or class it's prepending.

Corresponding JH branch

You can create a corresponding JH branch on GitLab JH by appending -jh to the branch name. If a corresponding JH branch is found, as-if-jh pipeline grabs files from the respective branch, rather than from the default branch main-jh.

NOTE: For now, CI will try to fetch the branch on the GitLab JH mirror, so it might take some time for the new JH branch to propagate to the mirror.

NOTE: While GitLab JH validation is a mirror of GitLab JH mirror, it does not include any corresponding JH branch beside the default main-jh. This is why when we want to fetch corresponding JH branch we should fetch it from the main mirror, rather than the validation project.

How as-if-JH pipeline was configured

The whole process looks like this:

NOTE: We only run sync-as-if-jh-branch when there are dependencies changes.

flowchart TD
  subgraph "JiHuLab.com"
    JH["gitlab-cn/gitlab"]
  end

  subgraph "GitLab.com"
    Mirror["gitlab-org/gitlab-jh-mirrors/gitlab"]

    subgraph MR["gitlab-org/gitlab merge request"]
      Add["add-jh-files job"]
      Prepare["prepare-as-if-jh-branch job"]
      Add --"download artifacts"--> Prepare
    end

    subgraph "gitlab-org-sandbox/gitlab-jh-validation"
      Sync["(*optional) sync-as-if-jh-branch job on branch as-if-jh-code-sync"]
      Start["start-as-if-jh job on as-if-jh/* branch"]
      AsIfJH["as-if-jh pipeline"]
    end

    Mirror --"pull mirror with master and main-jh"--> gitlab-org-sandbox/gitlab-jh-validation
    Mirror --"download JiHu files with ADD_JH_FILES_TOKEN"--> Add
    Prepare --"push as-if-jh branches with AS_IF_JH_TOKEN"--> Sync
    Sync --"push as-if-jh branches with AS_IF_JH_TOKEN"--> Start
    Start --> AsIfJH
  end

  JH --"pull mirror with corresponding JH branches"--> Mirror

Tokens set in the project variables

ADD_JH_FILES_TOKEN: This is a GitLab JH mirror project token with read_api permission, to be able to download JiHu files.
AS_IF_JH_TOKEN: This is a GitLab JH validation project token with write_repository permission, to push generated as-if-jh/* branch.

How we generate the as-if-JH branch

First add-jh-files job will download the required JiHu files from the corresponding JH branch, saving in artifacts. Next prepare-as-if-jh-branch job will create a new branch from the merge request branch, commit the changes, and finally push the branch to the validation project.

Optionally, if the merge requests have changes to the dependencies, we have an additional step to run sync-as-if-jh-branch job to trigger a downstream pipeline on as-if-jh-code-sync branch in the validation project. This job will perform the same process as JiHu code-sync, making sure the dependencies changes can be brought to the as-if-jh branch prior to run the validation pipeline.

If there are no dependencies changes, we don't run this process.

How we trigger and run the as-if-JH pipeline

After having the as-if-jh/* branch prepared and optionally synchronized, start-as-if-jh job will trigger a pipeline in the validation project to run the cross-project downstream pipeline.

How the GitLab JH mirror project is set up

The GitLab JH mirror project is private and CI is disabled.

It's a pull mirror pulling from GitLab JH, mirroring all branches, overriding divergent refs, triggering no pipelines when mirror is updated.

The pulling user is @gitlab-jh-bot, who is a maintainer in the project. The credentials can be found in the 1password engineering vault.

No password is used from mirroring because GitLab JH is a public project.

How the GitLab JH validation project is set up

This GitLab JH validation project is public and CI is enabled, with temporary project variables set.

It's a pull mirror pulling from GitLab JH mirror, mirroring specific branches: (master|main-jh), overriding divergent refs, triggering no pipelines when mirror is updated.

The pulling user is @gitlab-jh-validation-bot, who is a maintainer in the project, and also a reporter in the GitLab JH mirror. The credentials can be found in the 1password engineering vault.

A personal access token from @gitlab-jh-validation-bot with write_repository permission is used as the password to pull changes from the GitLab JH mirror. Username is set with gitlab-jh-validation-bot.

There is also a pipeline schedule to run maintenance pipelines with variable SCHEDULE_TYPE set to maintenance running every day, updating cache.

The default CI/CD configuration file is also set at jh/.gitlab-ci.yml so it runs exactly like GitLab JH.

Additionally, a special branch as-if-jh-code-sync is set and protected. Maintainers can push and developers can merge for this branch. We need to set it so developers can merge because we need to let developers to trigger pipelines for this branch. This is a compromise before we resolve Developer-level users no longer able to run pipelines on protected branches.

It's used to run sync-as-if-jh-branch to synchronize the dependencies when the merge requests changed the dependencies. See How we generate the as-if-JH branch for how it works.

Temporary GitLab JH validation project variables

BUNDLER_CHECKSUM_VERIFICATION_OPT_IN is set to false
- We can remove this variable after JiHu has jh/Gemfile.checksum committed. More context can be found at: Setting it to false to skip it

Why do we have both the mirror project and validation project?

We have separate projects for a several reasons.

Security: Previously, we had the mirror project only. However, to fully mitigate a security issue, we had to make the mirror project private.
Isolation: We want to run JH code in a completely isolated and standalone project. We should not run it under the gitlab-org group, which is where the mirror project is. The validation project is completely isolated.
Cost: We don't want to connect to JiHuLab.com from each merge request. It is more cost effective to mirror the code from JiHuLab.com to somewhere at GitLab.com, and have our merge requests fetch code from there. This means that the validation project can fetch code from the mirror, rather than from JiHuLab.com. The mirror project will periodically fetch from JiHuLab.com.
Branch separation/security/efficiency: We want to mirror all branches, so that we can fetch the corresponding JH branch from JiHuLab.com. However, we don't want to overwrite the as-if-jh-code-sync branch in the validation project, because we use it to control the validation pipeline and it has access to AS_IF_JH_TOKEN. However, we cannot mirror all branches except a single one. See this issue for details.

Given this issue, the validation project is set to only mirror master and main-jh. Technically, we don't even need those branches, but we do want to keep the repository up-to-date with all the default branches so that when we push changes from the merge request, we only need to push changes from the merge request, which can be more efficient.
Separation of concerns:
- Validation project only has the following branches:
  - master and main-jh to keep changes up-to-date.
  - as-if-jh-code-sync for dependency synchronization. We should never mirror this.
  - as-if-jh/* branches from the merge requests. We should never mirror these.
- All branches from the mirror project are all coming from JiHuLab.com. We never push anything to the mirror project, nor does it run any pipelines. CI/CD is disabled in the mirror project.

We can consider merging the two projects to simplify the setup and process, but we need to make sure that all of these reasons are no longer concerns.

`rspec:undercoverage` job

Introduced in GitLab 14.6.

The rspec:undercoverage job runs undercover to detect, and fail if any changes introduced in the merge request has zero coverage.

The rspec:undercoverage job obtains coverage data from the rspec:coverage job.

If the rspec:undercoverage job detects missing coverage due to a CE method being overridden in EE, add the pipeline:run-as-if-foss label to the merge request and start a new pipeline.

In the event of an emergency, or false positive from this job, add the pipeline:skip-undercoverage label to the merge request to allow this job to fail.

Troubleshooting `rspec:undercoverage` failures

The rspec:undercoverage job has known bugs that can cause false positive failures. You can test coverage locally to determine if it's safe to apply pipeline:skip-undercoverage. For example, using <spec> as the name of the test causing the failure:

Run SIMPLECOV=1 bundle exec rspec <spec>.
Run scripts/undercoverage.

If these commands return undercover: ✅ No coverage is missing in latest changes then you can apply pipeline:skip-undercoverage to bypass pipeline failures.

Test suite parallelization

Our current RSpec tests parallelization setup is as follows:

The retrieve-tests-metadata job in the prepare stage ensures we have a knapsack/report-master.json file:
- The knapsack/report-master.json file is fetched from the latest main pipeline which runs update-tests-metadata (for now it's the 2-hourly maintenance scheduled master pipeline), if it's not here we initialize the file with {}.
Each [rspec|rspec-ee] [migration|unit|integration|system|geo] n m job are run with knapsack rspec and should have an evenly distributed share of tests:
- It works because the jobs have access to the knapsack/report-master.json since the "artifacts from all previous stages are passed by default".
- the jobs set their own report path to "knapsack/${TEST_TOOL}_${TEST_LEVEL}_${DATABASE}_${CI_NODE_INDEX}_${CI_NODE_TOTAL}_report.json".
- if knapsack is doing its job, test files that are run should be listed under Report specs, not under Leftover specs.
The update-tests-metadata job (which only runs on scheduled pipelines for the canonical project and updates the knapsack/report-master.json in 2 ways:
1. By default, it takes all the knapsack/rspec*.json files and merge them all together into a single knapsack/report-master.json file that is saved as artifact.
2. (Experimental) When the AVERAGE_KNAPSACK_REPORT environment variable is set to true, instead of merging the reports, the job will calculate the average of the test duration between knapsack/report-master.json and knapsack/rspec*.json to reduce the performance impact from potentially random factors such as spec ordering, runner hardware differences, flaky tests, etc. This experimental approach is aimed to better predict the duration for each spec files to distribute load among parallel jobs more evenly so the jobs can finish around the same time.

After that, the next pipeline uses the up-to-date knapsack/report-master.json file.

Flaky tests

Automatic skipping of flaky tests

We used to skip tests that are known to be flaky, but we stopped doing so since that could actually lead to actual broken master. Instead, we introduced a fast-quarantining process to proactively quarantine any flaky test reported in #master-broken incidents.

This fast-quarantining process can be disabled by setting the $FAST_QUARANTINE variable to false.

Automatic retry of failing tests in a separate process

Unless $RETRY_FAILED_TESTS_IN_NEW_PROCESS variable is set to false (true by default), RSpec tests that failed are automatically retried once in a separate RSpec process. The goal is to get rid of most side-effects from previous tests that may lead to a subsequent test failure.

We keep track of retried tests in the $RETRIED_TESTS_REPORT_FILE file saved as artifact by the rspec:flaky-tests-report job.

See the experiment issue.

Compatibility testing

By default, we run all tests with the versions that runs on GitLab.com.

Other versions (usually one back-compatible version, and one forward-compatible version) should be running in nightly scheduled pipelines.

Exceptions to this general guideline should be motivated and documented.

Ruby versions testing

We're running Ruby 3.0 on GitLab.com, as well as for the default branch. To prepare for the next Ruby version, we run merge requests in Ruby 3.1.

This takes effects at the time when Run merge requests in Ruby 3.1 by default is merged. See Ruby 3.1 epic for the roadmap to fully make Ruby 3.1 the default.

To make sure both Ruby versions are working, we also run our test suite against both Ruby 3.0 and Ruby 3.1 on dedicated 2-hourly scheduled pipelines.

For merge requests, you can add the pipeline:run-in-ruby3_0 label to switch the Ruby version to 3.0. When you do this, the test suite will no longer run in Ruby 3.1 (default for merge requests).

When the pipeline is running in a Ruby version not considered default, an additional job verify-default-ruby will also run and always fail to remind us to remove the label and run in default Ruby before merging the merge request. At the moment both Ruby 3.0 and Ruby 3.1 are considered default.

This should let us:

Test changes for Ruby 3.1
Make sure it will not break anything when it's merged into the default branch

PostgreSQL versions testing

Our test suite runs against PostgreSQL 14 as GitLab.com runs on PostgreSQL 14 and Omnibus defaults to PG14 for new installs and upgrades.

We do run our test suite against PostgreSQL 14 on nightly scheduled pipelines.

We also run our test suite against PostgreSQL 13 upon specific database library changes in merge requests and main pipelines (with the rspec db-library-code pg13 job).

Current versions testing

Where?	PostgreSQL version	Ruby version
Merge requests	14 (default version), 13 for DB library changes	3.1
`master` branch commits	14 (default version), 13 for DB library changes	3.0 (default version)
`maintenance` scheduled pipelines for the `master` branch (every even-numbered hour)	14 (default version), 13 for DB library changes	3.0 (default version)
`maintenance` scheduled pipelines for the `ruby3_1` branch (every odd-numbered hour), see below.	14 (default version), 13 for DB library changes	3.1
`nightly` scheduled pipelines for the `master` branch	14 (default version), 13, 15	3.0 (default version)

There are 2 pipeline schedules used for testing Ruby 3.1. One is triggering a pipeline in ruby3_1-sync branch, which updates the ruby3_1 branch with latest master, and no pipelines will be triggered by this push. The other schedule is triggering a pipeline in ruby3_1 5 minutes after it, which is considered the maintenance schedule to run test suites and update cache.

The ruby3_1 branch must not have any changes. The branch is only there to set RUBY_VERSION to 3.1 in the maintenance pipeline schedule.

The gitlab job in the ruby3_1-sync branch uses a gitlab-org/gitlab project token with write_repository scope and Maintainer role with no expiration. The token is stored in the RUBY3_1_SYNC_TOKEN variable in gitlab-org/gitlab.

Redis versions testing

Our test suite runs against Redis 6 as GitLab.com runs on Redis 6 and Omnibus defaults to Redis 6 for new installs and upgrades.

We do run our test suite against Redis 7 on nightly scheduled pipelines, specifically when running forward-compatible PostgreSQL 15 jobs.

Current versions testing

Where?	Redis version
MRs	6
`default branch` (non-scheduled pipelines)	6
`nightly` scheduled pipelines	7

Single database testing

By default, all tests run with multiple databases.

We also run tests with a single database in nightly scheduled pipelines, and in merge requests that touch database-related files.

Single database tests run in two modes:

Single database with one connection. Where GitLab connects to all the tables using one connection pool. This runs through all the jobs that end with -single-db
Single database with two connections. Where GitLab connects to gitlab_main, gitlab_ci database tables using different database connections. This runs through all the jobs that end with -single-db-ci-connection.

If you want to force tests to run with a single database, you can add the pipeline:run-single-db label to the merge request.

Monitoring

The GitLab test suite is monitored for the main branch, and any branch that includes rspec-profile in their name.

Logging

Rails logging to log/test.log is disabled by default in CI for performance reasons. To override this setting, provide the RAILS_ENABLE_TEST_LOG environment variable.

Pipelines types for merge requests

In general, pipelines for an MR fall into one of the following types (from shorter to longer), depending on the changes made in the MR:

Documentation pipeline: For MRs that touch documentation.
Backend pipeline: For MRs that touch backend code.
Review app pipeline: For MRs that touch frontend code.
End-to-end pipeline: For MRs that touch code in the qa/ folder.

A "pipeline type" is an abstract term that mostly describes the "critical path" (for example, the chain of jobs for which the sum of individual duration equals the pipeline's duration). We use these "pipeline types" in metrics dashboards to detect what types and jobs need to be optimized first.

An MR that touches multiple areas would be associated with the longest type applicable. For instance, an MR that touches backend and frontend would fall into the "Frontend" pipeline type since this type takes longer to finish than the "Backend" pipeline type.

We use the rules: and needs: keywords extensively to determine the jobs that need to be run in a pipeline. Note that an MR that includes multiple types of changes would have a pipelines that include jobs from multiple types (for example, a combination of docs-only and code-only pipelines).

Following are graphs of the critical paths for each pipeline type. Jobs that aren't part of the critical path are omitted.

Documentation pipeline

Reference pipeline.

graph LR
  classDef criticalPath fill:#f66;

  1-3["docs-lint links (5 minutes)"];
  class 1-3 criticalPath;
  click 1-3 "https://app.periscopedata.com/app/gitlab/652085/Engineering-Productivity---Pipeline-Build-Durations?widget=8356757&udv=0"

Backend pipeline

Reference pipeline.

graph RL;
  classDef criticalPath fill:#f66;

  1-3["compile-test-assets (5.5 minutes)"];
  class 1-3 criticalPath;
  click 1-3 "https://app.periscopedata.com/app/gitlab/652085/Engineering-Productivity---Pipeline-Build-Durations?widget=6914317&udv=0"
  1-6["setup-test-env (3.6 minutes)"];
  click 1-6 "https://app.periscopedata.com/app/gitlab/652085/Engineering-Productivity---Pipeline-Build-Durations?widget=6914315&udv=0"
  1-14["retrieve-tests-metadata"];
  click 1-14 "https://app.periscopedata.com/app/gitlab/652085/Engineering-Productivity---Pipeline-Build-Durations?widget=8356697&udv=0"
  1-15["detect-tests"];
  click 1-15 "https://app.periscopedata.com/app/gitlab/652085/EP---Jobs-Durations?widget=10113603&udv=1005715"

  2_5-1["rspec & db jobs (24 minutes)"];
  class 2_5-1 criticalPath;
  click 2_5-1 "https://app.periscopedata.com/app/gitlab/652085/Engineering-Productivity---Pipeline-Build-Durations"
  2_5-1 --> 1-3 & 1-6 & 1-14 & 1-15;

  ac-1["rspec:artifact-collector (2 minutes)<br/>(workaround for 'needs' limitation)"];
  class ac-1 criticalPath;
  ac-1 --> 2_5-1;

  3_2-1["rspec:coverage (3 minutes)"];
  class 3_2-1 criticalPath;
  click 3_2-1 "https://app.periscopedata.com/app/gitlab/652085/Engineering-Productivity---Pipeline-Build-Durations?widget=7248745&udv=0"
  3_2-1 --> ac-1;

  4_3-1["rspec:undercoverage (1.3 minutes)"];
  class 4_3-1 criticalPath;
  click 4_3-1 "https://app.periscopedata.com/app/gitlab/652085/EP---Jobs-Durations?widget=13446492&udv=1005715"
  4_3-1 --> 3_2-1;

Review app pipeline

Reference pipeline.

graph RL;
  classDef criticalPath fill:#f66;

  1-2["build-qa-image (2 minutes)"];
  click 1-2 "https://app.periscopedata.com/app/gitlab/652085/Engineering-Productivity---Pipeline-Build-Durations?widget=6914325&udv=0"
  1-5["compile-production-assets (12 minutes)"];
  class 1-5 criticalPath;
  click 1-5 "https://app.periscopedata.com/app/gitlab/652085/Engineering-Productivity---Pipeline-Build-Durations?widget=6914312&udv=0"

  2_3-1["build-assets-image (1.1 minutes)"];
  class 2_3-1 criticalPath;
  2_3-1 --> 1-5

  2_6-1["start-review-app-pipeline (52 minutes)"];
  class 2_6-1 criticalPath;
  click 2_6-1 "https://app.periscopedata.com/app/gitlab/652085/Engineering-Productivity---Pipeline-Build-Durations"
  2_6-1 --> 2_3-1 & 1-2;

End-to-end pipeline

Reference pipeline.

graph RL;
  classDef criticalPath fill:#f66;

  1-2["build-qa-image (2 minutes)"];
  click 1-2 "https://app.periscopedata.com/app/gitlab/652085/Engineering-Productivity---Pipeline-Build-Durations?widget=6914325&udv=0"
  1-5["compile-production-assets (12 minutes)"];
  class 1-5 criticalPath;
  click 1-5 "https://app.periscopedata.com/app/gitlab/652085/Engineering-Productivity---Pipeline-Build-Durations?widget=6914312&udv=0"
  1-15["detect-tests"];
  click 1-15 "https://app.periscopedata.com/app/gitlab/652085/EP---Jobs-Durations?widget=10113603&udv=1005715"

  2_3-1["build-assets-image (1.1 minutes)"];
  class 2_3-1 criticalPath;
  2_3-1 --> 1-5

  2_4-1["e2e:package-and-test-ee (103 minutes)"];
  class 2_4-1 criticalPath;
  click 2_4-1 "https://app.periscopedata.com/app/gitlab/652085/Engineering-Productivity---Pipeline-Build-Durations?widget=6914305&udv=0"
  2_4-1 --> 1-2 & 2_3-1 & 1-15;

CI configuration internals

See the dedicated CI configuration internals page.

Performance

See the dedicated CI configuration performance page.

Return to Development documentation

Pipelines for the GitLab project

Predictive test jobs before a merge request is approved

Overview of the GitLab project test dependency

Predictive Tests Dashboards

The detect-tests CI job

RSpec predictive jobs

Determining predictive RSpec test files in a merge request

Static mappings

Dynamic mappings

Exceptional cases

Have you encountered a problem with backend predictive tests?

Jest predictive jobs

Determining predictive Jest test files in a merge request

Exceptional cases

Have you encountered a problem with frontend predictive tests?

Fork pipelines

Fail-fast job in merge request pipelines

Re-run previously failed tests in merge request pipelines

How it works?

Merge Trains

Why do we need to have a "stable" master branch to enable merge trains?

How stable does the master branch have to be for us to enable merge trains?

Could we gradually move to merge trains in our CI/CD configuration?

Faster feedback for some merge requests

Broken Master Fixes

Revert MRs

The pipeline:expedite label

Test jobs

End-to-end jobs

Review app jobs

As-if-FOSS jobs

As-if-JH cross project downstream pipeline

What it is

How we run it

When to consider applying pipeline:run-as-if-jh label

Corresponding JH branch

How as-if-JH pipeline was configured

Tokens set in the project variables

How we generate the as-if-JH branch

How we trigger and run the as-if-JH pipeline

How the GitLab JH mirror project is set up

How the GitLab JH validation project is set up

Temporary GitLab JH validation project variables

Why do we have both the mirror project and validation project?

rspec:undercoverage job

Troubleshooting rspec:undercoverage failures

Test suite parallelization

Flaky tests

Automatic skipping of flaky tests

Automatic retry of failing tests in a separate process

Compatibility testing

Ruby versions testing

PostgreSQL versions testing

Current versions testing

Redis versions testing

Current versions testing

Single database testing

Monitoring

Logging

Pipelines types for merge requests

Documentation pipeline

Backend pipeline

Review app pipeline

End-to-end pipeline

CI configuration internals

Performance

The `detect-tests` CI job

The `pipeline:expedite` label

When to consider applying `pipeline:run-as-if-jh` label

`rspec:undercoverage` job

Troubleshooting `rspec:undercoverage` failures